Дима, еще раз пишу.
Pre injection
When the ignition is switched on, the main relay and fuel pump relay are activated during a few
seconds. As soon as the ECU gets the cranking signal (from crankshaft sensor) it initiates a coolant
dependant injection with all four injectors simultaneously, this ensures a fast engine start. If the
engine is started, and shortly after is switched off again, a new pre injection is initiated after 45
seconds waiting time with the ignition switched off
Документация по трионику 19 страница.
__________________
Лечу блоки ЦЗ заклинаниями, снимаю порчу с герконовых реле.
Заговариваю штатные ИММО, привораживаю автозапуск. Отвязываю VSS
Tech2, прошивка Saab и не только.
Дорого Выезд....ПО МО и МСК.. ночью дороже. :saab:
|